Toro Reelmaster 3100-D - Assembling the Lift Cylinder to the Left Lift Arm; Assembling the Lift Cylinder to the Right Lift Arm

Assembling the Lift Cylinder to the Left Lift Arm
G402568
1. Assembly the lift cylinder to the left lift arm as
shown.
2. Apply No. 2 lithium grease to the grease
fittings
of the lift arm and the hydraulic
cylinder.
Assembling the Lift Cylinder to the Right Lift Arm
G402572
1. Align a drain pan below the hydraulic fittings of
the lift cylinder.
G402570
2. At the lift cylinder, loosen the straight swivel
fitting
of the return hose and the 90° swivel
fitting
of the lift hose.
3. Wrap a rag around the hose fittings.
G402573
4. Slowly move the lift-cylinder rod until it
aligns with the holes in the right lift-arm flanges
.
Setup: Installing the Front Lift Arms Page 3–7 3466-297 A