Toro Reelmaster 3100-D - Installing the Exhaust Guard; Installing the CE Decals

G402593
7. Screw the bolt into the other arm of hood-
latch bracket
to lock the latch in position.
Note: Tighten the nut and bolt until the bolt
no longer moves forward and backward in the
hood-latch bracket.
13
Installing the Exhaust Guard
CE Machines
Parts Required
1 Exhaust guard
4 Self-tapping screw
G402594
Position and secure the exhaust guard to the
frame with 4 self-tapping screws.
14
Installing the CE Decals
CE Machines
Parts Required
1 Year of production decal
1 CE decal
1 Tilt danger decal
Setup: Installing the Exhaust Guard Page 3–17 3466-297 A