Torquing the Wheel Nuts
Torque the wheel nuts in a crossing pattern to 61 to 88 N∙m (45 to 65 ft-lb).
WARNING
Failing to maintain proper torque of the wheel nuts could result in death or serious
injury.
Maintain proper torque of the wheel nuts.
Adjusting the Traction Drive for Neutral
If the machine moves when the traction pedal is in the neutral position, adjust the traction
cam.
1. Prepare the machine for maintenance.
2. Raise a front wheel and a rear wheel off the ground and place support blocks under the
frame.
WARNING
If the machine is not supported adequately, it may accidentally fall, which could result
in death or serious injury.
Raise a front wheel and the rear wheel off the ground to prevent the machine from
moving during the adjustment.
G416234
3. Loosen the locknut on the traction
adjustment cam
.
3466-297A Page 6–23 Maintenance: Drive System Maintenance
To Next Page
Loading...
