Changing the Hydraulic Fluid (continued)
G417015
Hydraulic filter
Filter head
3. Install the hydraulic hose when hydraulic fluid stops draining.
4. Fill the tank with the specified hydraulic fluid.
IMPORTANT
Use only the hydraulic fluids specified. Other fluids could cause system damage.
G417013
Cap
Filler neck (hydraulic-fluid
reservoir)
Dipstick
5. Install the dipstick and cap onto the filler neck.
6. Start the engine and use all hydraulic controls to distribute the hydraulic fluid throughout
the system.
7. Check for leaks and then shut off the engine.
8. Check the fluid level and add enough to raise the level to full mark on the dipstick.
IMPORTANT
Do not overfill the reservoir.
Maintenance: Hydraulic System Maintenance Page 6–32 3466-297 A
To Next Page
Loading...
