Toro reelmaster 5410 series - Gear Pump (P4) Flow Test (Using Tester with Flow Meter and Pressure Gauge) (5410;5410-G;5410-D;5510;5510-G;5510-D;5610)

GearPump(P4)FlowTest(UsingTesterwithFlowMeterand
PressureGauge)(5410/5410-G/5410-D/5510/5510-G/5510-D/5610)
g230028
Figure103
Thegearpump(P4)owtestshouldbeperformedtoensurethatthecuttingunit
liftcircuithasadequatehydraulicow.
TestProcedure
1.Parkmachineonalevelsurfacewiththecuttingunitsloweredandreel
engageswitchOFF.Ensurethattheengineisshutoff.Applytheparking
brake.
2.ReadallWarning,Cautions,andprecautionslistedatthebeginningofthis
section.
Reelmaster
®
5410/5510/5610Series
Page6–89
HydraulicSystem:TestingtheHydraulicSystem
15216SLRevC