Toro reelmaster 5410 series - Reel Assembly Service (Cutting Units with Aluminum Side Plates)

ReelAssemblyInstallation(continued)
13.Installthebedbarassembly;refertoInstallingtheBedbarAssembly(page
9–21).
14.Adjustthecuttingunit;refertotheCuttingUnitOperator’sManual.
Note:Theparallelpositionoftherearrollertothecuttingreeliscontrolledby
theprecisionmachinedframeandsideplatesofthecuttingunit.Ifnecessary,
thecuttingunitsideplatescanbeloosenedandaslightadjustmentcanbe
madetoparalleltherearrollerwiththecuttingreel;refertoLevelingthe
RearRoller(page9–15).
15.Installaccessoriesifequipped.RefertoServiceandRepairs(page10–6)
foradditionalbeltdrivengroomerinformation.RefertoServiceandRepairs
(page11–4)foradditionaluniversalgroomerinformation.RefertoRear
RollerBrush–Optional(cuttingunitswithaluminumsideplates)(page9–57)
foradditionalrearrollerbrushinformation.
16.Ifcounterweightwasremovedfromcuttingunit,installnewO-ringoncounter
weight.Securecounterweighttocuttingunitsideplatewithtwo(2)ange
nuts.T orquescrewsfrom37to44N∙m(27to33ft‐ ‐
‐
lbs).
17.installcuttingunittothemachine.
ReelAssemblyService(cuttingunitswithaluminumsideplates)
g230065
Figure345
1.Cuttingreel7.Sealedbearing(2each)
2.Threadedinsert(righthandthread)8.Threadedinsert(lefthandthreads)
3.Plasticplug(2each)9.Grooveindicatinglefthandthreads
4.Retainingring(2each)
10.Reelspider
5.Specialwasher(2each)
11.Retainingringgroove
6.Flockedseal(2each)
12.Bearingshoulder
Reelmaster
®
5410/5510/5610Series
Page9–39
CuttingUnit:ServiceandRepairs
15216SLRevC