Toro reelmaster 5410 series - Idler Assembly

IdlerAssembly
g220503
Figure396
1.Socket-headscrew(2each)6.Threadedinsert(right)11.Clevispin
2.Pivothub
7.Shield12.Cotterpin
3.O-ring8.Stubshaft
13.Bearing
4.Idlerarm9.Flockedbearingshield
(2each)
14.Retainingring
5.Threadedinsert(left)10.Collar
15.Flangenut
Note:Thegroomeridlerassemblyislocatedonthesamesideofthecutting
unitasthecuttingunithydraulicmotor.
RemovingtheIdlerAssembly
1.Parkthemachineonacleanandlevelsurface,lowerthecuttingunits
completelytotheground,shutofftheengine,settheparkingbrake,and
removethekeyfromthekeyswitch.
2.Removethehydraulicreelmotorfromthecuttingunit;refertoRemovingthe
HydraulicReelMotor(page9–17).
3.Removethegroomerreelassembly;refertoRemovingtheGroomerReel
(page11–13).
4.Removethecotterpinandclevispinfromtheheightadjustmentrodatthe
frontoftheidlerarm.Discardthecotterpin.
5.Removethe2socket-headscrews(item1inFigure396)thatsecurethe
pivothubtothecuttingunit,andremovethepivothubandidlerassembly
fromthecuttingunit.
6.Inspecttheshields,bearing,andbushingintheidlerassembly.Removeand
discardthecomponentsthatarewornordamaged.
Reelmaster
®
5410/5510/5610Series
Page11–11
UniversalGroomer(Optional):ServiceandRepairs
15216SLRevC