Toro reelmaster 5410 series - Rear Wheel Motors (Machine with Crosstrax AWD)

RearWheelMotors(MachinewithCrossTraxAWD)
g217167
Figure159
1.Wheelmotor(right)5.Hydraulichose(2eachpermotor)
9.Locknut
2.O-ring(2eachpermotor)6.Wheelmotor(left)10.Bolt(4eachpermotor)
3.45°hydraulictting(2eachper
motor)
7.Woodruffkey11.Lockwasher(4eachpermotor)
4.O-ring(2eachpermotor)
8.Wheelhub
12.CrossTraxcontrolmanifold
RemovingtheRearWheelMotor
CAUTION
Beforeopeningthehydraulicsystem,operateallthehydraulic
controlstoreleasesystempressureandavoidinjuryfromthe
pressurizedhydraulicuid;refertoReleasingPressurefromthe
HydraulicSystem(page6–8).
1.Parkthemachineonalevelsurface,lowerthecuttingunits,shutoffthe
engine,settheparkingbrake,andremovethekeyfromthekeyswitch.
2.Blockthefrontwheelswithchockstopreventthemachinefrommoving.
Reelmaster
®
5410/5510/5610Series
Page6–179
HydraulicSystem:ServiceandRepairs
15216SLRevC