Toro reelmaster 5410 series - Lift Cylinder

LiftCylinder
g216673
Figure182
1.Cylinderpin6.Cylinderslidepin11.O-ring(2each)
16.Flatwasher
2.Liftcylinder
7.#4liftarm12.O-ring(2each)
17.Bolt
3.Carriagescrew
8.Hydraulichose13.Flangenut18.Locknut
4.Retainingring(2each)
9.Hydraulichose14.R-clamp
5.Thrustwasher(2each)10.90°hydraulictting
(2each)
15.Flange-headscrew
Note:Theprocedureforliftcylinderremovalandinstallationisthesamefor
allReelmaster5010seriesliftcylinders.Figure182showstheliftcylinderfor
theleft,front#4cuttingunit.
RemovingtheLiftCylinder
1.Parkthemachineonalevelsurface,lowerthecuttingunits,shutoffthe
engine,settheparkingbrake,andremovethekeyfromthekeyswitch.
2.ReadtheGeneralPrecautionsforRemovingandInstallingtheHydraulic
SystemComponents(page6–145).
3.Iftheliftcylinderforoutsidefrontcuttingunits(#4or#5)isbeingremoved,
removetheangenut(item13inFigure182)andcarriagescrewthatsecure
theR-clamptotheliftcylinder.
HydraulicSystem:ServiceandRepairs
Page6–216
Reelmaster
®
5410/5510/5610Series
15216SLRevC