Toro reelmaster 5410 series - Page 501

AssemblingtheBrake(continued)
8.Installnewlocknut(item15inFigure294)ontothewheelmotorshaftto
securethewheelhubtothemotorshaft.
9.Installthebrakedrum(item14inFigure294).
10.Positiontheendofthebrakecabletothebrakeactuatorlever(item12in
Figure295).Attachthecabletothebrakeactuatorleverwiththeclevispin
andbrakereturnspring.
11.Installthefrontwheelassembly;refertoInstallingtheWheel(page8–6).
12.Checkandadjustthebrakes;refertotheOperator’sManual.
13.Lowerthemachinetotheground.
WARNING
Failuretomaintainpropertorquecouldresultinfailureorlossof
wheelandmayresultinpersonalinjury.
Maintainthepropertorqueofthewheel-lugnuts.
14.Torquethewheelhublocknut(item15inFigure294)thatsecuresthewheel
hubto407to542N∙m(300to400ft-lb).
CAUTION
Afterservicingthebrakes,alwayscheckthebrakesforproper
operationinawideopen,levelareathatisfreeofotherpersons
andobstructions.
15.Checkfortheoperationofthebrake,beforeyoureturnthemachineto
operation.
BurnishBrakePads
Afterthebrakepadreplacement,burnish(break-in)thebrakesbeforeuse.
1.Bringthemachinetofullspeedandapplythebrakestorapidlystopthe
machinewithoutskiddingorlockingupthewheels.
2.Repeatthisprocedurefor10times.T oavoidoverheatingthebrakes,wait1
minutebetweeneachstop.
Reelmaster
®
5410/5510/5610Series
Page8–13
Chassis:ServiceandRepairs
15216SLRevC