2. PRINTER SETUP ENGLISH VERSION
2.2 Connecting the Power Cord
E2- 3
2.2 Connecting the
Power Cord
1. Make sure that the printer Power Switch is in the OFF () position.
Connect the Power Cord to the printer as shown in the figure below.
2.
Plug the other end of the Power Cord into a grounded outlet as shown
in the figure below.
[US Type][EU Type]
CAUTION!
1. Make sure that the printer
Power Switch is turned to
the OFF position ()
before connecting the
Power Cord to prevent
possible electric shock or
damage to the printer.
2. Connect the Power Cord
to a supply outlet with a
properly grounded
(earthed) connection.
Power Cord
Power Switch
Power Cord
Power Cord
To Next Page
Loading...
Need help?
General
