3. ONLINE MODE ENGLISH VERSION
3.5 User System Mode
E3- 7
3.5 USER SYSTEM MODE
3.5.1 OUTLINE OF USER SYSTEM MODE
1. The printer enters the user system mode with the following operations.
While the printer is in pause state, perform either of the following operations:
・ Hold down the [RESTART] key for 3 sec. or more.
・ Hold down the [MODE] key for 3 sec. or more.
While the printer is in online, perform the following operation:
・ Hold down the [MODE] key for 3 sec. or more.
2. The user system mode is intended for performing parameter and other settings.
3. The key operations for the user system mode are described below.
For the key functions and display, please refer B-EX6T key operation manual.
Display
USER SYSTEM MODE C1.6
<2>SET PARAMETERS
<4>SYSTEM TOOLS
<1>EXIT
<3>DETECTION LEVEL
Top menu list
Outline of the top menu
<1>EXIT
Used to return the printer to online state. (The printer is not reset.)
<2>SET PARAMETERS
Used to set the parameters for each printer function.
<3>DETECTION LEVEL
Used to set the threshold value.
<4>SYSTEM TOOLS
Used to print data sent from the host or store it in USB memory.
<5>SHOW ISSUE CONDITION
Used to display the print conditions (such as sensor type, print speed and
orientation).
<6>RESET
Used to reset the printer.
3.5.2 EXIT
The printer is returned from the user system mode to the online mode. (No reset is performed.)
S
ome parameter settings are reset when the Exit is performed. The parameters to be reset are indicated with
“Reset Req.”. Other parameters are not reset
To Next Page
Loading...
Need help?
General
