Toshiba B-EX6T3 TS User Manual

7. SUPPLY SPECIFICATIONS ENGLISH VERSION
7.1 Media
E7-3
7.1.2 Detection Area of the Transmissive Sensor
The Transmissive Sensor is movable from the centre to the left edge of media.
The Transmissive Sensor detects a gap between labels, as illustrated below.
NOTE:
Round holes are not acceptable.
Min 12 mm
＜Tags＞
＜Labels＞
Min. 2.0mm
(
Min. 6.0mm
when the cutter
is used)

Toshiba B-EX6T3 TS Specifications

General

Brand	Toshiba
Model	B-EX6T3 TS
Category	Barcode Reader
Language	English