3. ONLINE MODE ENGLISH VERSION EO1-33089
3.2 LCD
E3- 2
3.2 LCD
Online state
Error state
(Example: Head open error)
No.
Description
(1) Model name and firmware version
(2) Message
(3) The number of labels printed
(4) IP address (only when LAN/WLAN is enabled.)
(5) Radio signal strength (only when WLAN is enabled.)
Indicates the strength of the radio signal in 4 levels.
(6) WLAN connection (only when WLAN is enabled.)
Ԃ Lights up when connecting to an access point.
Ԃ Flashes while roaming.
Ԃ Goes off when disconnected.
(7) Presence of a print job
Appears when a print job exists.
(8) RFID (only when RFID module is installed.)
Ԃ Appears when a communication between the printer and the
RFID module is enabled.
Ԃ Flashes while communicating with the RFID module.
(9) Ribbon near end
Flashes when a ribbon near end state is detected.
(10)
The number of remaining labels to print
(11)
Error description and solution
(12)
Help guide
Appears when a help guide message is provided. Press the
[RIGHT] key to see the help guide message.
(1)
(2)
(3)
(4)
(5) (6) (8)
(7) (9)
(10)
(12)
(11)
To Next Page
Loading...
Need help?
General
