4. MAINTENANCE ENGLISH VERSION
4.1 Cleaning
E4- 3
4.1.3 Optional Cutter Module
T
he disc cutter is available as an option.
1. Turn off the power and open the Top Cover.
2. Turn the Head Lever to Free position, then release the Print Head
Block Holder Plate
3. Open the Print Head Block.
4. Unscrew the Plastic Head Screw so that the Cutter Unit will open
5. Clean the Cutter with a soft cloth slightly moistened with alcohol.
6. Attach the Cutter Cover.
WARNING!
1. Be sure to turn the power
off before cleaning the
Cutter Module.
2. As the cutter blade is
sharp, care should be
taken not to injure
yourself while cleaning.
Print Head block Holder
Plate
Head Lever
Top Cover
Plastic Head Screw
Cutter
Cutter Unit
To Next Page
Loading...
Need help?
General
