4. MAINTENANCE ENGLISH VERSION
4.1 Cleaning
E4- 2
4.1.1 Print Head/Platen/
Sensors (Cont.)
4.1.2 Covers and Panels
6. Clean the Print Head Element with a Print Head Cleaner or a cotton
swab or soft cloth slightly moistened with alcohol.
7. Wipe the Platen, Feed Roller, and Pinch Roller with a soft cloth slightly
moistened with alcohol. Remove dust or foreign substances from the
internal parts of the printer.
8. W
ipe the Feed Gap Sensor and Black Mark Sensor with a dry soft
cloth.
Wipe the covers and panels with a dry soft cloth or a cloth slightly
moistened with a mild detergent solution.
1. DO NOT POUR WATER
directly onto the printer.
2. DO NOT APPLY cleaner
or detergent directly onto
any cover or panel.
3. NEVER USE THINNER
OR OTHER VOLATILE
SOLVENT on the plastic
covers.
4. DO NOT clean the panel,
covers, or the supply
window with alcohol as it
may cause them to
discolour, lose their shape
or develop structural
weakness.
NOTE:
Please purchase the Print
Head Cleaner from your
authorised TOSHIBA TEC
service representative.
Print Head
Element
Platen
Black Mark Sensor/
Feed Roller
Pinch Roller
To Next Page
Loading...
Need help?
General
