Toshiba Satellite Pro M10 Series - Page 208

4 Replacement Procedures
4-viii Satellite Pro M10 Series Maintenance Manual (960-431)
Figure 4-31 Removing the wireless LAN card................................................................ 4-47
Figure 4-32 Removing the screws from the bottom of the computer.............................. 4-49
Figure 4-33 Disconnecting the cable ............................................................................... 4-50
Figure 4-34 Removing the screws from the top cover .................................................... 4-51
Figure 4-35 Removing the top cover with display assembly .......................................... 4-52
Figure 4-36 Removing the sound board .......................................................................... 4-54
Figure 4-37 Removing the cooling fan............................................................................ 4-55
Figure 4-38 Removing the RTC battery .......................................................................... 4-58
Figure 4-39 Dismounting the AC adaptor jack ............................................................... 4-59
Figure 4-40 Removing the system board......................................................................... 4-60
Figure 4-41 Removing the modem cable......................................................................... 4-61
Figure 4-42 Removing the VGA board ........................................................................... 4-62
Figure 4-43 Removing the USB board ............................................................................ 4-63
Figure 4-44 Removing the screws on the display mask .................................................. 4-64
Figure 4-45 Removing the display mask......................................................................... 4-65
Figure 4-46 Removing the screw from the FL inverter board......................................... 4-67
Figure 4-47 Removing the FL inverter board.................................................................. 4-68
Figure 4-48 Removing the screws that secure the LCD module..................................... 4-70
Figure 4-49 Removing the LCD module......................................................................... 4-71
Figure 4-50 Removing the metal braces.......................................................................... 4-72
Figure 4-51 Freeing the antenna coaxial cables .............................................................. 4-74
Figure 4-52 Removing the plastic cover.......................................................................... 4-75
Figure 4-53 Removing the antennas................................................................................ 4-76
Figure 4-54 Removing the plastic cover.......................................................................... 4-78
Figure 4-55 Remove the metal brace............................................................................... 4-79
Figure 4-56 Removing the LCD/FL cable....................................................................... 4-80
Figure 4-57 Removing the PCB cover and tape .............................................................. 4-81
Figure 4-58 Removing the two screws for fixing the power supply board ..................... 4-82
Figure 4-59 Releasing the 18 hooks ................................................................................ 4-83
Figure 4-60 Removing the panel assembly ..................................................................... 4-84
Figure 4-61 Removing the panel assembly ..................................................................... 4-85
Figure 4-62 Removing the screws for fixing the FL tube back cover............................. 4-86