4.33 TFT FL (Model 15.0 SXGA+ SHARP LQ150F1LH43) 4 Replacement Procedures
Satellite Pro M10 Series Maintenance Manual (960-431) 4-143
Installing the TFT FL (Model 15.0 SXGA+ SHARP LQ150F1LH43)
To install the TFT FL (Model 15.0 SXGA+ SHARP LQ150F1LH43), follow the steps below
and refer to Figures 4-114 to 4-126.
1. Apply four strips of double-faced tape to the frame.
Apply the tape along the
indentation in the frame.
Do not let any tape protrude
beyond the indentation.
Double-face tape (1)
Double-face tape (2)
Double-face tape (3)
Double-face tape (4)
Figure 4-114 Applying the double-faced tape
To Next Page
Loading...
