4 Replacement Procedures 4.33 TFT FL (Model 15.0 SXGA+ SHARP LQ150F1LH43)
4-144 Satellite Pro M10 Series Maintenance Manual (960-431)
2. Install a new FL unit into the frame.
Frame
FL
Cross section of Z—Z
Install the FL into the frame making sure
it does not stick out from the frame.
Let the reflective sheet inside the reflector
Fit the wire firmly into the groove
Z
Z
Figure 4-115 Installing the FL
NOTE: Be careful not to fold the reflective sheet when you install the FL unit.
To Next Page
Loading...
