4.33 TFT FL (Model 15.0 SXGA+ SHARP LQ150F1LH43) 4 Replacement Procedures
Satellite Pro M10 Series Maintenance Manual (960-431) 4-145
3. Seat the lamp cover on the backlight unit and secure it with two screws.
Tighten the screws with 0.9kgf•cm of torque.
Screw
Screw
Lamp cover
Figure 4-116 Installing the lamp cover
4. Install the light guide sheet in the backlight unit.
Light guide sheet
Insert the light guide sheet straight
to avoid deforming any sheets.
Figure 4-117 Installing the light guide sheet
To Next Page
Loading...
