EasyManuals Logo

Toshiba TS3100 User Manual

Toshiba TS3100
368 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #54 background imageLoading...
Page #54 background image
OPERATOR’S MANUALseries Robot Controller
3.2 Guidance Coordinates
(1) Function
Selects a coordinate system in which the robot is guided, from among the joint,
tool, work and world coordinate systems. Guide will be made possible along
the selected coordinate system.
(2) Procedures
(a) Step 1: Selection of tool or work coordinate system.
Select the work or tool coordinate system used for [TRANS] of the utility
function. For details, see Section 12.
When using the joint or world coordinate system, this operation is
unnecessary.
(b) Step 2: Coordinate selection.
Each time the COORDINATE key on the teach pendant is pressed, JOINT,
TOOL, WORK, and WORLD are selected in turn with the appropriate LED
illuminated. The initial setting is JOINT.
(3) Cautions
For each coordinate system of the robot, see the Language Manual.
Unless a tool, base or work coordinate has been taught to the robot, the tool
coordinate system matches the flange face, and the work and world
coordinate systems coincide with the base coordinate system.
When using the tool or work coordinate system, make sure what tool and
work have been selected.
STE 80720
– 3-3

Table of Contents

Other manuals for Toshiba TS3100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Toshiba TS3100 and is the answer not in the manual?

Toshiba TS3100 Specifications

General IconGeneral
BrandToshiba
ModelTS3100
CategoryController
LanguageEnglish

Related product manuals