TP-Link T2700G-28TQ - Show Mac Address-Table Vlan

T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
140
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the information of the MAC address 00:00:00:23:00:00 in VLAN 1:
T2700G-28TQ(config)#show mac address-table address 00:00:00:23:00:00
vid 1
Display the information of the MAC address 00:00:00:23:00:00:
T2700G-28TQ(config)#show mac address-table address 00:00:00:23:00:00
Display the information of the MAC address 00:00:00:23:00:00 on port 1/0/20:
T2700G-28TQ(config)#show mac address-table address 00:00:00:23:00:00
interface gigabitEthernet 1/0/20
show mac address-table vlan
Description
The show mac address-table vlan command is used to display the MAC
address configuration of the specified vlan.
Syntax
show mac address-table vlan vid
Parameter
vid —— The specified VLAN id.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the MAC address configuration of vlan 1:
T2700G-28TQ(config)#show mac address-table vlan 1