TP-Link T2700G-28TQ - Clear Ip Ospf; Show Ip Ospf

T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
394
no ip ospf mtu-ignore
Command Mode
Interface Configuration Mode
Example
Configure interface VLAN 2 to ignore the MTU field check in the DD exchange
process:
T2700G-28TQ(config-if)# ip ospf mtu-ignore
clear ip ospf
Description
The clear ip ospf command is used to reset the OSPF process, which will clear
all the dynamic information. The clear ip ospf process command will reset all
the OSPF processes.
Syntax
clear ip ospf [ process-id ]
clear ip ospf process
Parameter
process-id —— The process ID, ranging from 1 to 65535.
Command Mode
Privileged EXEC Mode
Example
Reset all the OSPF processes:
T2700G-28TQ# clear ip ospf process
show ip ospf
Description
The show ip ospf is used to display the global information of the OSPF
process.