TP-Link T2700G-28TQ - Remove Public-Key; Show Ip Ssh

T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
129
remove public-key
Description
The remove public-key command is used to remove the SSH public key from
the switch.
Syntax
remove public-key { v1 | v2 }
Parameter
v1 | v2 —— Select the type of SSH public key, v1 represents SSH-1, v2
represents SSH-2.
Command Mode
Privileged EXEC Mode
Example
Remove the SSH-1 type public key from the switch:
T2700G-28TQ# remove public-key v1
show ip ssh
Description
The show ip ssh command is used to display the global configuration of SSH
and the SSH public key.
Syntax
show ip ssh
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the global configuration of SSH and the SSH public key:
T2700G-28TQ(config)#show ip ssh