TP-Link T2700G-28TQ - Show Cluster Ndp; Show Cluster Neighbor

T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
285
show cluster ndp
Description
The show cluster ndp command is used to display the NDP information.
Syntax
show cluster ndp [ interface [ fastEthernet port | gigabitEthernet port |
ten-gigabitEthernet port ] ]
Parameter
port —— Specify the Ethernet port number. The NDP information of all ports will
be displayed if the port number is not specified here.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the global NDP information of the switch:
T2700G-28TQ(config)#show cluster ndp
Display the NDP information of all the ports of the switch:
T2700G-28TQ(config)#show cluster ndp interface
show cluster neighbor
Description
The show cluster neighbor command is used to display the cluster’s neighbor
information.
Syntax
show cluster neighbor
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the cluster’s neighbor information:
T2700G-28TQ(config)#show cluster neighbor