TP-Link T2700G-28TQ - Clear Vrrp Statistics; Show Vrrp

T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
351
Example
Configure the tracked interface as vlan2 and the priority decrement as 10 for the
tracking interface:
T2700G-28TQ(config)#interface vlan 3
T2700G-28TQ(config-if)#vrrp vrid 4 track interface vlan vlan2
reduce-priority 10
clear vrrp statistics
Description
This command is used to clear all the statistics about vrrp on the switch.
Syntax
clear vrrp statistics
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Clear all the statistics about vrrp on the switch:
T2700G-28TQ(config)# clear vrrp statistics
show vrrp
Description
This command is used to display the basic configuration information of all the
virtual routers or a specified virtual router.
Syntax
show vrrp [ vrid vrid ][ interface {{ fastEthernet | gigabitEthernet |
ten-gigabitEthernet } port | vlan vlan-id }]
Parameter
vrid —— The virtual router ID.
fastEthernet | gigabitEthernet | ten-gigabitEthernet —— The port type of the
interface.
port —— The port number.
vlan-id —— The interface VLAN ID.