TP-Link T2700G-28TQ - Show Vrrp Statistics

T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
352
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the vrrp information of virtual router 4 on interface VLAN 3:
T2700G-28TQ(config)# show vrrp vrid 4 interface vlan 3
show vrrp statistics
Description
This command is used to display the statistics of a virtual router on a specified
interface or all the virtual routers on the switch.
Syntax
show vrrp statistics [ vrid vrid ][ interface {{ fastEthernet | gigabitEthernet |
ten-gigabitEthernet } port | vlan vlan-id }]
Parameter
vrid —— The virtual router ID.
fastEthernet | gigabitEthernet | ten-gigabitEthernet —— The port type of the
interface.
port —— The port number.
vlan-id —— The interface VLAN ID.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the statistics of virtual router 4 on interface 3:
T2700G-28TQ(config)# show vrrp statistics vrid 4 interface vlan 3