TP-Link T2700G-28TQ - Show Ip Igmp Snooping Interface

T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
243
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the global configuration of IGMP Snooping:
T2700G-28TQ#show ip igmp snooping
show ip igmp snooping interface
Description
The show ip igmp snooping interface command is used to display the port
configuration of IGMP.
Syntax
show ip igmp snooping interface [ fastEthernet port | gigabitEthernet port |
ten-gigabitEthernet port ] { basic-config | packet-stat | max-groups}
show ip igmp snooping interface [ fastEthernet port-list | gigabitEthernet
port-list | ten-gigabitEthernet port–list ] { basic-config | max-groups |
packet-stat }
Parameter
port —— The Fast/Gigabit Ethernet port number. By default, the configuration of
all ports is displayed.
basic-config | max-groups | packet-stat —— The related configuration
information selected to display.
port-list —— The list group of Ethernet ports.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the IGMP basic configuration of Gigabit Ethernet port 2:
T2700G-28TQ#show ip igmp snooping interface gigabitEthernet 1/0/2
basic-config
Display the IGMP basic configuration of Gigabit Ethernet ports 2-4:
T2700G-28TQ#show ip igmp snooping interface gigabitEthernet 1/0/2-4
basic-config