TP-Link T2700G-28TQ - System-Time Dst Recurring

T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
145
offset —— Specify the time adding in minutes when Daylight Saving Time
comes. The value ranges from 1 to 1440 and the default value is 60 minutes. It
is optional.
Command Mode
Global Configuration Mode
Example
Configure the DST start time as 00:00 am on April 1
st
of 2013, the end time as
00:00 am on October 1
st
of 2013 and the offset as 30 minutes:
T2700G-28TQ(config)#system-time dst date Apr 1 00:00 2013 Oct 1 00:00
2013 30
system-time dst recurring
Description
The system-time dst recurring command is used to specify the DST
configuration in recurring mode. This configuration is recurring in use. The time
period is not restricted to be within one year.
Syntax
system-time dst recurring {sweek} {sday} {smonth} {stime} {eweek} {eday}
{emonth} {etime} [offset]
Parameter
sweek —— Week to start, with the options: first, second, third, fourth, last.
sday —— Day to start, with the options: Sun, Mon, Tue, Wed, Thu, Fri, Sat.
smonth—— Month to start, with options: Jan, Feb, Mar, Apr, May, Jun, Jul, Aug,
Sep, Oct, Nov, Dec.
stime —— Time to start, in the format of: hh:mm.
eweek —— Week to end, with options: first, second, third, fourth, last.
eday —— Day to end, with options: Sun, Mon, Tue, Wed, Thu, Fri, Sat.
emonth —— Month to end, with options: Jan, Feb, Mar, Apr, May, Jun, Jul, Aug,
Sep, Oct, Nov, Dec.
etime —— Time to end, in the format of: hh:mm.
offset —— Specify the time adding in minutes when Daylight Saving Time
comes. The range of value depends and the default value is 60 minutes. It is
optional.