147
Syntax
location location
no location
Parameter
location —— Device Location. It consists of 32 characters at most. It is
SHENZHEN by default.
Command Mode
Global Configuration Mode
Example
Configure the system location as GUANGZHOU:
T2700G-28TQ(config)#location GUANGZHOU
contact-info
Description
The contact-info command is used to configure the system contact information.
To clear the system contact information, please use no contact-info command.
Syntax
contact-info contact_info
no contact-info
Parameter
contact_info —— Contact Information. It consists of 32 characters at most. It is
www.tp-link.com by default.
Command Mode
Global Configuration Mode
Example
Configure the system contact information as www.tp-link.com:
T2700G-28TQ(config)#contact-info www.tp-link.com
To Next Page
Loading...
