TP-Link T2700G-28TQ - Show Voice Vlan Switchport

T2700G-28TQ
JetStream 28-Port Gigabit Stackable L2+ Managed Switch CLI Guide
59
show voice vlan switchport
Description
The show voice vlan switchport command is used to display the configuration
information of all the ports or one specified port in the Voice VLAN.
Syntax
show voice vlan switchport [fastEthernet port | gigabitEthernet port |
ten-gigabitEthernet port ]
Parameter
port ——The Fast/Gigabit/Ten-Gigabit Ethernet port number selected to display
the configuration information.
Command Mode
Privileged EXEC Mode and Any Configuration Mode
Example
Display the configuration information of Gigabit Ethernet port 1/0/1 in the Voice
VLAN:
T2700G-28TQ(config)#show voice vlan switchport gigabitEthernet 1/0/1
Display the configuration information of all the ports in the Voice VLAN:
T2700G-28TQ(config)#show voice vlan switchport