Need help?Do you have a question about the TP-Link T2500G-10TS and is the answer not in the manual?
General| Switching Capacity | 20 Gbps |
|---|---|
| MAC Address Table | 8K |
| Fan Quantity | Fanless |
| Power Supply | 100-240VAC, 50/60Hz |
| Mounting | Rack Mountable |
| Jumbo Frame | 9KB |
| Dimensions | 440 x 180 x 44mm |
| Standards and Protocols | IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x |
| Quality of Service | 802.1p |
| L2 Features | Port Mirroring |
| VLAN | 802.1Q VLAN |
| Access Control List | L2/L3/L4 ACL |
| Security | IP-MAC-Port Binding, Port Security |
| Management | Web-based GUI, SNMP v1/v2c/v3, RMON, Syslog |
| Ports | 8 x 10/100/1000Mbps RJ45 ports, 2 x 1G/10G SFP+ ports |
Explains how to access the switch's web management interface using its default IP address.
Configures basic system properties like name, location, time, and network parameters.
Manages user accounts, access levels, and passwords for the web management interface.
Configures security measures for remote login, including IP, MAC, and port-based access control.
Configures basic port features like status, speed, duplex, flow control, and LAG.
Configures standard VLANs using 802.1Q tagging for network segmentation and broadcast control.
Configures global Spanning Tree Protocol (STP) parameters like version, priority, and timers.
Configures port-specific STP parameters including priority, path cost, and edge port settings.
Configures security features like Loop Protect, Root Protect, and BPDU Protect to prevent attacks.
Configures the switch to act as a DHCP relay agent, enabling clients in different VLANs to get IP addresses.
Configures Quality of Service by classifying, mapping, and scheduling network traffic based on priority.
Creates and manages Access Control Lists (ACLs) with rules for packet filtering and traffic control.
Binds IP and MAC addresses to ports for enhanced network access control and security.
Detects and filters illegal ARP packets to prevent attacks like IP/MAC spoofing.
Protects against Denial of Service (DoS) attacks by analyzing and discarding malicious packets.
Implements port-based network access control for user authentication and authorization.
Explains how to download firmware using the bootUtil menu via FTP for switch recovery.
To Next Page
