TP-Link T2500G-10TS - 11.2 ACL Config

163
Choose the menu QoS→Bandwidth Control→Storm Control to load the following page.
Figure 10-11 Storm Control
The following entries are displayed on this screen:
 Storm Control Config
Port Select: Click the Select button to quick-
select the corresponding port
based on the port number you entered.
Select:
Select the desired port for Storm Control configuration. It is
multi-optional.
Port:
Displays the port number of the switch.
Broadcast Rate
(bps):
Select the bandwidth for receiving broadcast packets on the
port. The
packet traffic exceeding the bandwidth will be
discarded. Select Disable to disable the storm control function
for the port.
Multicast Rate (bps):
Select the bandwidth for receiving multicast packets on the
port. The packet traffic exceeding the bandwidt
h will be
discarded. Select Disable to disable the storm control function
for the port.
UL-
Frame Rate
(bps):
Select the bandwidth for receiving UL-
Frame on the port. The
packet traffic exceeding the bandwidth will be discarded. Select
Disable to disable the storm control function for the port.
LAG:
Displays the LAG number which the port belongs to.