TP-Link T2500G-10TS - 10.2 Bandwidth Control

151
9.3 Multicast Table
In a network, receivers can join different multicast groups appropriate to their needs. The
switch forwards multicast streams based on IPv4/IPv6 multicast address table.
The Multicast Table function is implemented on the IPv4 Multicast Table and IPv6 Multicast
Table pages.
9.3.1 IPv4 Multicast Table
On this page you can view the information of the multicast groups already on the switch.
Multicast IP addresses range from 224.0.0.0 to 239.255.255.255. The range for receivers to
join is from 224.0.1.0 to 239.255.255.255.
Choose the menu Multicast→Multicast Table→IPv4 Multicast Table to load the following
page.
Figure 9-21 IPv4 Multicast Table
The following entries are displayed on this screen:

Search Option
Multicast IP:
Enter the multicast IP address the desired entry must carry.
VLAN ID:
Enter the VLAN ID the desired entry must carry.
Port:
Select the port number the desired entry must carry.
Type:
Select the type the desired entry must carry.

All: Displays all multicast IP entries.

Static: Displays all static multicast IP entries.

Dynamic: Displays all dynamic multicast IP entries.

Multicast IP Table
Multicast IP:
Displays multicast IP address.
VLAN ID:
Displays the VLAN ID of the multicast group.