TP-Link T2500G-10TS - Policy Binding; Binding Table

180
QoS Remark:
Select QoS Remark to forward the data packets based on the QoS
settings.
 DSCP:
Specify the DSCP region for the data packets those
match the corresponding ACL.
 Local Priority: Specify the
local priority for the data packets
those match the corresponding ACL.
11.4 Policy Binding
Policy Binding function can have the policy take its effect on a specific port/VLAN. The policy
will take effect only when it is bound to a port/VLAN. In the same way, the port/VLAN will
receive the data packets and process them based on the policy only when the policy is bound
to the port/VLAN.
The Policy Binding can be implemented on Binding Table, Port Binding and VLAN Binding
pages.
11.4.1 Binding Table
On this page view the policy bound to port/VLAN.
Choose the menu ACL→Policy Binding→Binding Table to load the following page.
Figure 11-12 Binding Table
The following entries are displayed on this screen:

Search Options
Show Mode:
Select a show mode appropriate to your needs.

Policy Bind Table
Select:
Select the desired entry to delete the corresponding binding
policy.
Index:
Displays the index of the binding policy.
Policy Name:
Displays the name of the binding policy.
Interface:
Displays the port number or VLAN ID bound to the policy.
Direction:
Displays the binding direction.