TP-Link T2500G-10TS - Page 160

150
Choose the menu Multicast→MLD Snooping→Packet Statistics to load the following page.
Figure 9-20 Packet Statistics
The following entries are displayed on this screen:

Auto Fresh
Auto Fresh:
Enable/Disable auto fresh feature.
Fresh Period: Enter the time from 3 to 300 seconds to specify the
auto fresh period.

MLD Packet Statistics
Received MLD
Query :
Displays the number of MLD Query packets the
switch has received.
Received MLDv1
Report:
Displays the number of MLDv1 Report packets
which the switch has received.
Received MLDv2
Report:
Displays the number of MLDv2 Report packets
which the switch has received.
Received MLD Done:
Displays the number of MLD Done packets which
the switch has received.
Send MLD
Spec-Query:
Displays the number of MLD Specific Query packets
which the switch has sent.
Error Packet:
Displays the number of error packets which the
switch has received.