TP-Link TD-VG5612

TD-VG5612
300Mbps Wireless N VoIP VDSL/ADSL Modem Router User Guide
28
Figure 4-11
Click Advance, advanced selections of ATM Configuration can be shown.
 Encapsulation M ode : Select the encapsulation mode for the Static IP Address. Here you
can leave it default.
 ATM Qo s Type: Select ATM Qos Type provided by ISP, and the type is UBR by default.
WAN Service Setup:
 Enable IPv 4
：
Check the box to enable IPv4.
 IP Address: Enter the IP address in dotted-decimal notation provided by your ISP.