Note:
If you want to change the default settings of Advanced Settings, please make sure that both VPN
server endpoints use the same Encryption Algorithm, Integrity Algorithm, Diffie-Hellman Group
and Key Life time in both phase1 and phase2.
If you select Manual as Key Exchange Method, the screen will display as follows:
Figure 4-34
Encryption Algorithm - Specify the encryption algorithm. Options include: DES, 3DES, AES
(aes-cbc).
Encryption Ke y - Place the mouse in this field about 2s，the requirements of the Encryption
Key will be displayed automatically. Enter the Encryption Key, and ensure both the two peers
use the same key.
Authentication Algorithm - Select the authentication algorithm. Options include: MD5 and
SHA1 .
Authentication Ke y - Place the mouse in this field about 2s，the requirements of the
Authentication Key will be displayed automatically. Then enter the authentication Key.
SPI – Specify the SPI (Security Parameter Index) manually. The SPI here must match the SPI
value at the other end of the tunnel, and vice versa.
4.6 IPTV
Choose “IPTV”, and you will see the screen as shown in Figure 4-35.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
