TPG CA-202A - Page 36

Func. Name Descriptions
Range of
Setting
Unit
Factory
Setting
Note
F5.32
UP/DOWN
Calibrating
Time
1~5: Terminal adjust the response
time. Continuous acceleration or
deceleration when over the
setting time
6: Edge trigger
1~6 ─ 1
*Note 9
F5.33
UP/DOWN
Frequency
Adjustment
A
djust UP/DOWN frequency on
keypad directly
0.00~400.00 0.01Hz 0.00
*Note 9
F5.35
Counting
Mode
0: Up counting mode
1: Down counting mode
0, 1 ─ 0
*Note 9
F5.36
Counter
Value 1
Set counter value 1 for sequential
operation control cycle
0~9999 1 0
*Note 9
F5.37
Counter
Value 2
Set counter value 2 for sequential
operation control cycle
0~9999 1 0
*Note 9
F5.39
Constant
Speed
Detection
Range
Set the bandwidth of constant speed
detection range
0.0~10.0 0.1Hz 2.0
*Note 9
F5.40
Frequency
Detection
Range
Set the bandwidth of frequency
detection range
0.0~10.0 0.1Hz 2.0
*Note 9
F5.41
Frequency
Detection
Level
Set the frequency detection level of
multi-function terminal
0.0~400.00 0.1Hz 0.0
*Note 9
The color as means functions can be set during the operation.
36