Trillium FLOWAY - Qualified Workers; Markings and Approvals

7 | IM-112 DECEMBER 2019
Vertical Turbine Pumps
2001299 - VTP- IOM
7 | IM-112 DECEMBER 2019
Vertical Turbine Pumps
2001299 - VTP- IOM
7 | IM-112 DECEMBER 2019
Vertical Turbine Pumps
2001299 - VTP- IOM
Vertical Turbine Pumps
Safety
Document Name: 2001299-VTP-IOM-EN Page 7 of 67
Revision 3 Copyright © 2014, Weir Floway, Inc. All Rights Reserved. Issue Date: December 12, 2014
2.4 Intended Use
Vertical turbine pumps are built in a variety of designs and materials and for many applications/services. The
manufacturer’s IOM manual must be studied carefully and followed.
For the safety of operating personnel, note that the information contained in this manual applies only to the
fitting of genuine Floway parts and recommended spares.
If the conditions of service on the purchase order are going to be changed (for example liquid pumped,
temperature or duty), it is requested that the user seek the manufacturer’s written agreement before start-up.
2.5 Qualified Workers
All personnel involved in the assembly, installation, operation, maintenance, inspection, and
decommissioning of pump equipment must be qualified to carry out the work involved. If the personnel in
question do not already possess the necessary knowledge and skill, appropriate training and instruction must
be provided.
If required, the operator may engage the manufacturer/supplier to provide applicable training.
Always coordinate repair activities with operations and workplace health and safety personnel, and follow all
plant safety requirements and applicable workplace health and safety laws and regulations.
DANGER
GENUINE OEM PARTS
• Genuine OEM parts and accessories are designed, tested and incorporated into the
products to help ensure they maintain continued product quality and performance in use.
•As Trillium Pumps USA does not test the parts and accessories sourced from other
vendors, the installation of such parts and accessories may adversely affect the
performance and safety features of the products.
• The failure to properly select, install or use authorized parts and accessories is
considered misuse. Damage or failure caused by misuse is not covered by our warranty.
• In addition, any modification of Trillium Pumps USA products or removal of original
components may impair the safety of these products in their use.
WARNING
SERIOUS PERSONAL INJURY AND EQUIPMENT DAMAGE
• Pump units must only be used for their intended purpose. Refer to the Certified Outline
Drawing and other contract documents for construction and application details.
• The pumps must not be operated beyond their design MAWPs (suction and discharge
sides), temperature limits and speed limits specified for the application. These limits are
dependent on the pump type, configuration and materials used. If there is any doubt
about the suitability of the product for the intended application, contact Trillium Pumps
USA , referencing the serial number.