51 | IM-112 DECEMBER 2019
Vertical Turbine Pumps
2001299 - VTP- IOM
51 | IM-112 DECEMBER 2019
Vertical Turbine Pumps
2001299 - VTP- IOM
51 | IM-112 DECEMBER 2019
Vertical Turbine Pumps
2001299 - VTP- IOM
Vertical Turbine Pumps
Repairs
Document Name: 2001299-VTP-IOM-EN Page 51 of 67
Revision 3 Copyright © 2014, Weir Floway, Inc. All Rights Reserved. Issue Date: December 12, 2014
8.9 Assembly
Before proceeding with assembly, thoroughly clean and check all the threads, registers and mating faces for
burrs. Deburr with file and emery cloth where required. Lubricate as given in “Lubrication” on page 50. Oil the
shafts lightly.
Proceed with assembly in reverse order of disassembly as outlined in “Disassembly” on page 46.
Refer to Table 8-1 for recommended torque values of typical fasteners.
Table 8-1: Recommended Torque Values for Typical Fasteners
CAUTION
EQUIPMENT DAMAGE
Cleanliness and proper lubrication are extremely important as one small chip, burr or dry
bearing can result in equipment damage and require further repair.
To Next Page
Loading...
