Trimble GeoExplorer Series User Manual

GeoExplorer Series Getting Started Guide System components 5
External antenna connector
Connection to an optional
external antenna.
Communication swipes
Place handheld in support module to:
• charge the battery
• provide USB connection to a computer
Attach optional serial clip to:
• charge battery
• provide external power
• provide serial (COM) port connection to a
computer
• connect to an external device such as a
BoB receiver or mobile phone
Internal battery
All-day operation with GPS.
Handstrap
Disk
• Internal flash memory
• Non-volatile
• 512 MB
Main memory
64 MB RAM.
CPU
206 MHz Intel StrongARM 1110
processor.
Speaker
GPS COM ports
NMEA, TSIP, and real-time
communication with integrated
GPS receiver.

Trimble GeoExplorer Series Specifications

General

Category	Handhelds
GNSS Receiver	Yes
Operating System	Windows Mobile
Display	Touchscreen
Processor	Varies depending on model
Memory	Varies depending on model (RAM and ROM)
Data Storage	SD card
Camera	integrated camera
Battery	Rechargeable Li-Ion battery (battery life varies by model and usage)
Connectivity	Bluetooth, USB
Durability	IP67 rated, rugged design
Dimensions	Varies depending on model
Weight	Varies depending on model