Trimble GeoExplorer Series User Manual

4 System components GeoExplorer Series Getting Started Guide
Parts of the GeoExplorer series handheld
The main hardware features of the GeoExplorer series handheld are
shown below.
Display button
Press to turn the backlight
on or off. Hold down to
adjust the backlight level.
Integrated GPS receiver
• High-performance
• Integrated WAAS/EGNOS
receiver
• EVEREST™ multipath rejection
technology (GeoXT only)
Configurable touch buttons
Tap to open the assigned program.
Default programs:
F1 GPS Controller
F2 Power Settings
F3 Memory Manager
F4 Bluetooth
®
wireless technology
settings
Advanced TFT color display
• 16-bit color (65,536 colors)
• Interactive touch screen
• ¼ VGA display
• Multi-stage backlight
Microphone
Run Notes and
tap in the
menu bar to
record.
Backlight touch buttons
Tap Backlight Up to turn on the
backlight, or to increase the
backlight level. Tap Backlight Down
to decrease the backlight level.
Pocket P
C
Field computer running Windows
Mobile 2003.
Integrated Bluetooth radio
Connect to external devices using
Bluetooth wireless technology.
Press both the Power button and
the Display button to align the
touch screen.
Power button
Press to turn on the handheld, or to
put it into Suspend mode.

Trimble GeoExplorer Series Specifications

General

Category	Handhelds
GNSS Receiver	Yes
Operating System	Windows Mobile
Display	Touchscreen
Processor	Varies depending on model
Memory	Varies depending on model (RAM and ROM)
Data Storage	SD card
Camera	integrated camera
Battery	Rechargeable Li-Ion battery (battery life varies by model and usage)
Connectivity	Bluetooth, USB
Durability	IP67 rated, rugged design
Dimensions	Varies depending on model
Weight	Varies depending on model