Triumph Trophy SE - Page 169

Specifications
169
Tightening Torques
Oil Filter. . . . . . . . . . . . . . . . . . . . . . . 10 Nm
Oil Drain Plug . . . . . . . . . . . . . . . . . . 25 Nm
Spark Plug . . . . . . . . . . . . . . . . . . . . . 12 Nm
Rear Wheel Nuts. . . . . . . . . . . . . . . . 70 Nm
Fluids and Lubricants
Engine Oil . . . . . . . . . . . . . . . . . . . . . Semi or fully synthetic 10W/40 or 10W/50
motorcycle engine oil which meets specification
API SH (or higher) and JASO MA, such as
Castrol Power 1 Racing 4T 10W-40 (fully synthetic)
Brake and Clutch Fluid . . . . . . . . . . . DOT 4 Brake and Clutch Fluid
Coolant . . . . . . . . . . . . . . . . . . . . . . . Triumph HD4X Hybrid OAT coolant
Bearings and Pivots. . . . . . . . . . . . . . Grease to NLGI 2 specification
Final Drive Unit . . . . . . . . . . . . . . . . . Castrol SAF-XO (fully synthetic hypoid oil)