25
General Information
High Coolant Temperature Warning
Light
With the engine running, if the
engine coolant temperature
becomes dangerously high, the
high coolant temperature warning
light in the tachometer will illuminate and
COOLANT TEMP HIGH will be visible in the
lower message screen.
1. High coolant temperature warning
light
2. Instrument message
Engine Management System
Malfunction Indicator Light
The malfunction indicator light for
the engine management system
illuminates briefly when the
ignition is switched on (to indicate that it is
working), but should not become illuminated
when the engine is running.
If the malfunction indicator light becomes
illuminated when the engine is running, this
indicates that a fault has occurred in one or
more of the systems controlled by the engine
management system. In such circumstances,
the engine management system will switch to
'limp-home' mode so that the journey may
be completed, if the fault is not so severe that
the engine will not run.
Note:
• If the malfunction indicator light
flashes when the ignition is switched
on, contact an authorised Triumph
dealer as soon as possible to have
the situation rectified. In these
circumstances the engine will not
start.
Stop the engine immediately if the high
coolant temperature warning light
illuminates. Do not restart the engine until
the fault has been rectified.
Severe engine damage will result from
running the engine when the high coolant
temperature warning light is illuminated.
Reduce speed and do not continue to ride
for longer than is necessary with the
malfunction indicator light illuminated. The
fault may adversely affect engine
performance, exhaust emissions and fuel
consumption. Reduced engine performance
could cause a dangerous riding condition,
leading to loss of motorcycle control and an
accident. Contact an authorised Triumph
dealer as soon as possible to have the fault
checked and rectified.
To Next Page
Loading...
