57
General Information
Activating Cruise Control
Note:
• The cruise control indicator light will
not illuminate until cruise control has
been activated by pressing SET/- on
the adjust button.
To turn on the cruise control, press in the
on/off button.
1. Cruise control ON/OFF button
2. Cruise control adjust button, SET/-
3. Cruise control adjust button, RES/+
To activate cruise control, the following
conditions have to be met:
• The motorcycle is travelling at a speed
between 30 to 100 mph (48 to 160 km/h);
• The motorcycle is in 4th gear or higher;
• The SET/- on the adjust button is
pressed.
The cruise control light will illuminate
indicating that cruise control is active and set,
and the set speed will be displayed in the
lower display area of the multi-function
display. The current set speed will be stored
until the ignition is turned off, and can be
resumed by pressing and releasing the RES/+
end of the adjust button (see page 58).
1. Cruise control warning light
2. Set speed
Note:
• Riding with either brake actuated or
the clutch not fully released will
prevent operation of the cruise
control system.
1
2
3
chdc
To Next Page
Loading...
