61
General Information
Ignition Switch/Steering Lock
1. Ignition switch/steering lock
2. LOCK position
3. OFF position
4. ON position
5. PARK position
Engine Immobiliser
The ignition barrel housing acts as the
antenna for the engine immobiliser.
When the ignition switch is turned to the OFF
position and the ignition key is removed, the
engine immobiliser is on (see page 26). The
engine immobiliser is turned off when the
ignition key is in the ignition switch and it is
turned to the ON position.
Ignition Switch Positions
This is a four position, key operated switch.
The key can be removed from the switch
only when it is in the OFF, LOCK or P (PARK)
position.
TO LOCK: Turn the handlebar fully to the
left, turn the key to the OFF position, push
and fully release the key, then rotate it to the
LOCK position.
PARKING: Turn the key from the LOCK
position to the P position. The steering will
remain locked, and the position lights will be
switched on.
Note:
• Do not leave the steering lock in the
P position for long periods of time as
this will cause the battery to
discharge.
P
U
S
H
P
O
F
F
O
N
3
2
5
1
4
To Next Page
Loading...
