Triumph Trophy SE - Multi-Function Display Screen; Speedometer; Tachometer

23
General Information
Speedometer
The analogue speedometer indicates the
road speed of the motorcycle. The read-out
displays the motorcycle road speed in
increments of one mile (or kilometre) per
hour.
Tachometer
The tachometer shows the engine speed in
revolutions per minute - rpm (r/min). At the
end of the tachometer range there is the
'red zone'. Engine rpm (r/min) in the red
zone is above maximum recommended
engine speed and is also above the range for
best performance.
Multi-function Display Screen
The multi-function display screen gives
information, messages and warnings about
various motorcycle functions. This
information is displayed in three ways -
permanently, automatically as required, or
selected by the rider.
Permanent messages include:
•clock;
• selected gear;
• ambient air temperature;
• coolant temperature;
• front and rear heated seat status (if fitted
and turned on);
• heated grip status (if fitted and turned
on);
• fuel gauge.
Automatic messages include:
• information messages;
• warning messages.
Automatic messages may be accompanied
by a warning light.
Messages which can be selected by the rider
include:
•trip computer 1;
•trip computer 2;
• settings menu (if the motorcycle is
stationary);
• adjustment menu (if the motorcycle is
moving).
Full details of the multi-function display
screen features and operation are described
starting on page 32.
Caution
Never allow engine rpm to enter the
'red zone' as severe engine damage may
result.