44
General Information
Changes made to the TES MODE, TES
LOADING, TTC or HEADLIGHT settings via
the ADJUSTMENT screen are stored in a
'current' profile, separately from the two
saved profiles.
This allows temporary changes to be made to
a profile without editing a saved profile,
however these changes will be lost when a
saved profile is loaded.
To load a saved profile see page 41 .
Trip Setup
After entering the TRIP SETUP screen, press
and release the SCROLL button until the
desired display is highlighted.
Trip Setup Screen
The display will scroll through in the following
order when pressing down on the SCROLL
button (it will scroll through in the reverse
order if up on the button is pressed):
• TRIP 1 ITEMS - pressing the SELECT
button enters the TRIP 1 setup screen
and prompts for the item to be set on
the upper display line (ITEM 1). Use the
SCROLL button to select an option (see
page 38) and press SELECT.
Trip 1 Items - Upper Display Line
10:08
N
22°C
TRIP 1 RESET
EXIT
TRIP 2 ITEMS
TRIP 1 ITEMS
TRIP SETUP
TRIP 2 RESET
To Next Page
Loading...
