45
General Information
• The instruments will now prompt for the
item to be set on the lower display line
(ITEM 2). Use the SCROLL button to
select an option (see page 38) and press
SELECT to exit.
Note:
• The same trip item cannot be
displayed in the UPPER and LOWER
position at the same time.
Trip 1 Items - Lower Display Line
• TRIP 1 RESET - pressing SELECT resets
TRIP 1 data immediately.
• TRIP 2 ITEMS pressing the SELECT
button enters the TRIP 2 setup screen
and prompts for the item to be set on
the upper display line (UPPER). Use the
SCROLL button to select an option (see
page 38) and press SELECT.
The instruments will now prompt for the
item to be set on the lower display line
(LOWER). Use the SCROLL button to
select an option (see page 38) and press
SELECT to exit.
Note:
• The same trip item cannot be
displayed in the UPPER and LOWER
position at the same time.
• TRIP 2 RESET - pressing SELECT resets
the TRIP 2 data immediately.
Note:
• The AUTO RESET function applies to
TRIP 2 only. TRIP 1 must be reset
manually using the TRIP 1 RESET
opposite, or the method described
on page 40.
• AUTO RESET - pressing the SELECT
button enters the AUTO RESET setup
screen.
Auto Reset
• Press the SCROLL button to select either
OFF, 1HR, 2HRS, 4HRS and 8HRs.
Press the SELECT button to save the
selection and exit.
After the set time has elapsed, Trip 2 will be
reset to zero.
The following trip items will be reset:
•journey time;
•journey distance;
• average fuel consumption;
• fuel used;
• average speed.
TRIP 1 ITEMS
LOWER
To Next Page
Loading...
